Machine Overview
Simultaneous Five Axis Machining Centres
Bed-mounted - 5-axis Table
Fully Supported Table, is Bed-mounted at both ends by the base ensuring astable foundation for the rotary axes.
Both rotary axes are roller-cam driven to ensure high speed, zero backlash, and low friction, allowing efficient and smooth transmission with minimal heat generation for precise operation.
Machine Specs
X-Axis: 700 mm
Y-Axis:Â 510 mm
Z-Axis:Â 600 mm
A-Axis: +30° / -120°
C-Axis: 360°
Spindle Speed: 10,000 (12,000) rpm
Spindle Taper: BBT 40 | HSKA63Â
Rapid Traverse Rate:Â 30 m/min
Cutting Feed Rate:Â 10 m/min
Controller: Mitsubish,FanucÂ
Dimensions
| X Axis Travel 700 mm |
Y Axis Travel 510 mm |
Z Axis Travel 600 mm |
Table Size Rectangle 620 x 410, Table with 410 Dia rotating |
| Spindle Nose to Table Surface 71-671 mm |
Maximum Loading Capacity 200/150 mm |
| Machine Weight 7200 kg |
Power Requirement (Controller) 35 KVA |
Capacity
| Spindle Taper BBT 40 |
Spindle Speed 10,000 |
Spindle Type Belt Drive |
| Mitsubishi Motor power(OPT) 11/15/18.5 kw |
Controller Mitsubishi, Fanuc |
|
| Rapid Traverse Rate (Opt) 30 m/min |
Cutting Feed Rate 10 m/min |
Tool Nos. Capacity 30 |
X-Axis: 700 mm
Y-Axis:Â 510 mm
Z-Axis:Â 600 mm
A-Axis: +30° / -120°
C-Axis: 360°
Spindle Speed:Â 12,000 rpm
Spindle Taper: BBT 40 | HSKA63
Rapid Traverse Rate:Â 30 m/min
Cutting Feed Rate:Â 10 m/min
Controller:Â Fagor
Dimensions
| X Axis Travel 700 mm |
Y Axis Travel 510 mm |
Z Axis Travel 600 mm |
Table Size Rectangle 620 x 410, Table with 410 Dia rotating |
| Spindle Nose to Table Surface 71-671 mm |
Maximum Loading Capacity 200/150 mm |
| Machine Weight 7200 kg |
Power Requirement (Controller) 35 KVA |
Capacity
| Spindle Taper BBT 40 |
Spindle Speed 10,000 |
Spindle Type Direct Drive |
| Mitsubishi Motor power(OPT) 11/15/18.5 kw |
Controller Fagor |
|
| Rapid Traverse Rate (Opt) 30 m/min |
Cutting Feed Rate 10 m/min |
Tool Nos. Capacity 30 |
X-Axis: 700 mm
Y-Axis: 700 mm
Z-Axis: 500 mm
A-Axis: +120° / -120°
C-Axis: 360°
Spindle Speed: 15,000 rpm
Spindle Taper: BBT 40 | HSKA63
Rapid Traverse Rate: 36 m/min
Cutting Feed Rate: 20 m/min
Controller:Â Fagor
Dimensions
| X Axis Travel 700 mm |
Y Axis Travel 700 mm |
Z Axis Travel 500 mm |
Table Size Dia. 680 |
| Spindle Nose to Table Surface 150-650 mm |
Maximum Loading Capacity 500 / 300 mm |
| Machine Weight 8750 kg |
Power Requirement (Controller) 50 KVA |
Capacity
| Spindle Taper - |
Spindle Speed 15,000 |
Spindle Type Direct Drive |
| Mitsubishi Motor power(OPT) 11 / 42 kw |
Controller Fagor |
|
| Rapid Traverse Rate (Opt) 48 m/min |
Cutting Feed Rate 20 m/min |
Tool Nos. Capacity 32 |
X-Axis: 800 mm
Y-Axis: 700 mm
Z-Axis: 500 mm
A-Axis: +120° / -120°
C-Axis: 360°
Spindle Speed: 18,000 rpm
Spindle Taper: BBT 40 | HSKA63
Rapid Traverse Rate: 36 m/min
Cutting Feed Rate: 20 m/min
Controller:Â Fagor
Dimensions
| X Axis Travel 700 mm |
Y Axis Travel 700 mm |
Z Axis Travel 500 mm |
Table Size Dia. 680 |
| Spindle Nose to Table Surface 150-650 mm |
Maximum Loading Capacity 500 / 300 mm |
| Machine Weight 9200 kg |
Power Requirement (Controller) 50 KVA |
Capacity
| Spindle Taper - |
Spindle Speed 15,000 |
Spindle Type Direct Drive |
| Mitsubishi Motor power(OPT) 11 / 42 kw |
Controller Fagor |
|
| Rapid Traverse Rate (Opt) 48 m/min |
Cutting Feed Rate 20 m/min |
Tool Nos. Capacity 32 |
Tools
| Maximum Tool Length 250 mm |
Tool Charging Timer 2.5 sec |
Maximum Tool Weight 7 Kg |
| Tool Diameter (with Adjacent Tool) 080 |
Tool Diameter (without Adjacent Tool) 0150 |
Accuracy
| Positioning Accuracy 0.01 mm |
Positioning Repeatability + 0.003 |
Angular Repeatability ( Rotary/Tilting) 6″ / 8″ |
Torque Power Diagrams
Fagor Controller
Fanuc Controller
Mitsubishi Controller
Automatic Kinematic Calibration
During the start-up of the machine or due to its continuous use or due to some incident, if recalibration is required, this controller can automatically do it.
HSSA (High Speed Surface Accuracy)
You can easily select the type of machining you want to obtain:
- As fast as possible (roughing)
- As accurate as possible
- The best surface quality
DMC (Dynamic Machining Control)
With this feature, the CNC automatically adapts the machining feed rate according to the tool force (load).
3+2 and 5-axis Machining
Library of kinematics. Work in inclined planes, 3+2,4+1 and continuous 5-axis RTCP machining.
Our Other Range of Excellence
High-tech Products For Unmatched Performance
