Surface Grinding Machine | Affordable Surface Grinding Machine Price

Creepgrind & Surfgrind Series

_CG800

_SG7040

_SG8040L

_SG1050

_SG1260

_SG1570

_SG2070

_RSG800

_RSG1000

Grinding Area: 800 × 350 mm

Longitudinal Travel: 800 mm

Cross Travel: 350 mm

Vertical Travel: 300 mm

Max. Load on Table: 300 kg

Spindle Motor: 22 kW

Spindle Speed: 1000–3000 rpm

Grinding Wheel Size Max. (OD × Width × ID): 400 × 100 × 127 mm

Rapid Traverse X Axis: 10,000 mm/min

Rapid Traverse Y Axis: 5,000 mm/min

Standard Features

- CNC Control System: Mitsubishi M-80 Advanced 3-axes Programmable
- Auto Grinding Cycle through CNC Control
- Capable of Profile & Creep Feed Grinding
- Capable of Mounting CBN Wheel
- MPG mode of operation for precise controls of 0.001 mm for all axes
- AC Servo drives with high precision ground ball screw for X, Y- & Z axes for accurate and precise controls
- Axial angular contact ball bearing for all axes ball screw
- Very rigid spindle with variable speed through servo motor
- LM Roller guide ways for all axes movement
- Machine elements made of high quality cast iron
- Centralised automatic lubrication system controlled by pressure switch and indicating
- Compact Band Filtration Unit with Auto Magnetic Separator
- Inbuilt Coolant System
- Coolant Chiller Capacity •Full Guarding System
- Panel AC for Electrical Cabinet
- Coolant nozzle with compensation for wheel wear and auto positioning on right hand side
- Precision Static Wheel Balancing Stand for Wheel up to 0 400mm Grinding Wheel Dia 400
- Grinding Wheel Flange for the above
- Balancing Arbor
- Grinding Wheel Clamping/Extraction Bolt
  Anti Vibration Pads
- Machine Geometrical Test Chart
- Operating Instruction Manual

Optional Features

Auto Wheel Balancer
Compact Band Filtration System
Dressing Crusher Unit with Diamond Auto Magnetic Separator
roll/disc
Mist Collector
Coolant Chiller
Precision Wheel Balancing Stand

Grinding Area: 700 × 400 mm

Longitudinal Travel: 750 mm

Cross Travel: 405 mm

Max. Load on Table: 350 kg

Spindle Motor: 3.75 kW

Spindle Speed: 1000–3000 rpm

Grinding Wheel Size Max. (OD × Width × ID): 300 × 40 × 76.2 mm

Machine Weight: 2500 kg

Standard Features

Auto Grinding Cycle through NC Control
Programmable Display Unit of 0.001 mm Resolution for Vertical Axis & Cross Axis
MPG Mode of Operation for Precise Controls of 0.001 mm Vertical Axis & Cross Axis
The Hydraulic Unit is situated inside the Coolant Tank for Increased Thermal Stability.
Operating Instruction Manual
Grinding Wheel
Table Movement by Hydraulic Cylinder with End Cushioning Grinding Wheel Flange and Infinitely Variable Table Speed
Table Stroke Setting by a Pair of Proximity Sensors
Machine Base, Column, Cross Slide, Table are made of High Quality Cast Iron
V & Flat Guide Ways Lined with Turcite-B for all Axes
Centralised Automatic Lubrication System
Interlocks on Table Traverse and Cycle Start/Spindle Rotation
Coolant System consisting of Coolant Pump, Splash Guards, Manually Adjustable Coolant Nozzle with all Pipe and Hose Connections
Grinding Wheel Clamping/Extraction Bolt Single Point Diamond Dresser
Machine Levelling Base
Machine Geometrical Test Chart 1 No.

Optional Features

Electromagnetic Chuck (Fine Pole)
Multipoint Diamond Dresser with Diamond
3-point Diamond Dresser with Diamond
Overhead Dresser
Auto Dressing with Compensation
Auto Magnetic Separator
Auto Paper Band Filtration System
Dust Extracter
Grinding Wheel
Wheel Flange (recessed) as per Wheel Size for each model
Static Wheel Balancing Stand as per Wheel Size for each model
Variable Spindle Speed
SM Guarding with Sliding Door

Grinding Area: 800 × 400 mm

Longitudinal Travel: 850 mm

Cross Travel: 450 mm

Distance Between Table to Spindle Centre: 525 mm

Max. Load on Table: 350 kg

Spindle Motor: 3.75 kW

Spindle Speed Max.: 1400 rpm

Grinding Wheel (OD × Width × ID): 300 × 40 × 76.2 mm

Drive (Longitudinal): Hydraulic

Drive (Vertical): Servo Motor with Ball Screw

Standard Features

Auto Grinding Cycle through NC Control
Programmable Display Unit of 0.001 mm Resolution for Vertical Axis & Cross Axis
MPG Mode of Operation for Precise Controls of 0.001 mm Vertical Axis & Cross Axis
The Hydraulic Unit is situated inside the Coolant Tank for Increased Thermal Stability.
Operating Instruction Manual
Grinding Wheel
Table Movement by Hydraulic Cylinder with End Cushioning Grinding Wheel Flange and Infinitely Variable Table Speed
Table Stroke Setting by a Pair of Proximity Sensors
Machine Base, Column, Cross Slide, Table are made of High Quality Cast Iron
V & Flat Guide Ways Lined with Turcite-B for all Axes
Centralised Automatic Lubrication System
Interlocks on Table Traverse and Cycle Start/Spindle Rotation
Coolant System consisting of Coolant Pump, Splash Guards, Manually Adjustable Coolant Nozzle with all Pipe and Hose Connections
Grinding Wheel Clamping/Extraction Bolt Single Point Diamond Dresser
Machine Levelling Base
Machine Geometrical Test Chart 1 No.

Optional Features

Electromagnetic Chuck (Fine Pole)
Multipoint Diamond Dresser with Diamond
3-point Diamond Dresser with Diamond
Overhead Dresser
Auto Dressing with Compensation
Auto Magnetic Separator
Auto Paper Band Filtration System
Dust Extracter
Grinding Wheel
Wheel Flange (recessed) as per Wheel Size for each model
Static Wheel Balancing Stand as per Wheel Size for each model
Variable Spindle Speed
SM Guarding with Sliding Door

Grinding Area: 1000 × 500 mm

Longitudinal Travel: 1100 mm

Cross Travel: 510 mm

Max. Load on Table: 650 kg

Spindle Motor: 5.5 kW

Spindle Speed: 1400 rpm

Grinding Wheel Size Max. (OD × Width × ID): 350 × 65 × 127 mm

Machine Weight: 5000 kg

Standard Features

Auto Grinding Cycle through NC Control
Programmable Display Unit of 0.001 mm Resolution for Vertical Axis & Cross Axis
MPG Mode of Operation for Precise Controls of 0.001 mm Vertical Axis & Cross Axis
The Hydraulic Unit is situated inside the Coolant Tank for Increased Thermal Stability.
Operating Instruction Manual
Grinding Wheel
Table Movement by Hydraulic Cylinder with End Cushioning Grinding Wheel Flange and Infinitely Variable Table Speed
Table Stroke Setting by a Pair of Proximity Sensors
Machine Base, Column, Cross Slide, Table are made of High Quality Cast Iron
V & Flat Guide Ways Lined with Turcite-B for all Axes
Centralised Automatic Lubrication System
Interlocks on Table Traverse and Cycle Start/Spindle Rotation
Coolant System consisting of Coolant Pump, Splash Guards, Manually Adjustable Coolant Nozzle with all Pipe and Hose Connections
Grinding Wheel Clamping/Extraction Bolt Single Point Diamond Dresser
Machine Levelling Base
Machine Geometrical Test Chart 1 No.

Optional Features

Electromagnetic Chuck (Fine Pole)
Multipoint Diamond Dresser with Diamond
3-point Diamond Dresser with Diamond
Overhead Dresser
Auto Dressing with Compensation
Auto Magnetic Separator
Auto Paper Band Filtration System
Dust Extracter
Grinding Wheel
Wheel Flange (recessed) as per Wheel Size for each model
Static Wheel Balancing Stand as per Wheel Size for each model
Variable Spindle Speed
SM Guarding with Sliding Door

Grinding Area: 1200 x 600 mm

Spindle Motor: 7.5KW

Machine Dimension: 5200 x 2990 x 2900 mm

Machine Weight: ~6000kg

Total Power Consumption: 14KW

Standard Features

Auto Grinding Cycle through NC Control
Programmable Display Unit of 0.001 mm Resolution for Vertical Axis & Cross Axis
MPG Mode of Operation for Precise Controls of 0.001 mm Vertical Axis & Cross Axis
The Hydraulic Unit is situated inside the Coolant Tank for Increased Thermal Stability.
Operating Instruction Manual
Grinding Wheel
Table Movement by Hydraulic Cylinder with End Cushioning Grinding Wheel Flange and Infinitely Variable Table Speed
Table Stroke Setting by a Pair of Proximity Sensors
Machine Base, Column, Cross Slide, Table are made of High Quality Cast Iron
V & Flat Guide Ways Lined with Turcite-B for all Axes
Centralised Automatic Lubrication System
Interlocks on Table Traverse and Cycle Start/Spindle Rotation
Coolant System consisting of Coolant Pump, Splash Guards, Manually Adjustable Coolant Nozzle with all Pipe and Hose Connections
Grinding Wheel Clamping/Extraction Bolt Single Point Diamond Dresser
Machine Levelling Base
Machine Geometrical Test Chart 1 No.

Optional Features

Electromagnetic Chuck (Fine Pole)
Multipoint Diamond Dresser with Diamond
3-point Diamond Dresser with Diamond
Overhead Dresser
Auto Dressing with Compensation
Auto Magnetic Separator
Auto Paper Band Filtration System
Dust Extracter
Grinding Wheel
Wheel Flange (recessed) as per Wheel Size for each model
Static Wheel Balancing Stand as per Wheel Size for each model
Variable Spindle Speed
SM Guarding with Sliding Door

Grinding Area: 1500 x 700 mm

Spindle Motor: 11KW

Machine Dimension: 6470 x 3550 x 3100 mm

Machine Weight: ~7500kg

Total Power Consumption: 18KW

Standard Features

Auto Grinding Cycle through NC Control
Programmable Display Unit of 0.001 mm Resolution for Vertical Axis & Cross Axis
MPG Mode of Operation for Precise Controls of 0.001 mm Vertical Axis & Cross Axis
The Hydraulic Unit is situated inside the Coolant Tank for Increased Thermal Stability.
Operating Instruction Manual
Grinding Wheel
Table Movement by Hydraulic Cylinder with End Cushioning Grinding Wheel Flange and Infinitely Variable Table Speed
Table Stroke Setting by a Pair of Proximity Sensors
Machine Base, Column, Cross Slide, Table are made of High Quality Cast Iron
V & Flat Guide Ways Lined with Turcite-B for all Axes
Centralised Automatic Lubrication System
Interlocks on Table Traverse and Cycle Start/Spindle Rotation
Coolant System consisting of Coolant Pump, Splash Guards, Manually Adjustable Coolant Nozzle with all Pipe and Hose Connections
Grinding Wheel Clamping/Extraction Bolt Single Point Diamond Dresser
Machine Levelling Base
Machine Geometrical Test Chart 1 No.

Optional Features

Electromagnetic Chuck (Fine Pole)
Multipoint Diamond Dresser with Diamond
3-point Diamond Dresser with Diamond
Overhead Dresser
Auto Dressing with Compensation
Auto Magnetic Separator
Auto Paper Band Filtration System
Dust Extracter
Grinding Wheel
Wheel Flange (recessed) as per Wheel Size for each model
Static Wheel Balancing Stand as per Wheel Size for each model
Variable Spindle Speed
SM Guarding with Sliding Door

Grinding Area: 2000 x 700 mm

Spindle Motor: 11KW

Machine Dimension: 8500 x 3600 x 3100 mm

Machine Weight: ~10000kg

Total Power Consumption: 21KW

Standard Features

Auto Grinding Cycle through NC Control
Programmable Display Unit of 0.001 mm Resolution for Vertical Axis & Cross Axis
MPG Mode of Operation for Precise Controls of 0.001 mm Vertical Axis & Cross Axis
The Hydraulic Unit is situated inside the Coolant Tank for Increased Thermal Stability.
Operating Instruction Manual
Grinding Wheel
Table Movement by Hydraulic Cylinder with End Cushioning Grinding Wheel Flange and Infinitely Variable Table Speed
Table Stroke Setting by a Pair of Proximity Sensors
Machine Base, Column, Cross Slide, Table are made of High Quality Cast Iron
V & Flat Guide Ways Lined with Turcite-B for all Axes
Centralised Automatic Lubrication System
Interlocks on Table Traverse and Cycle Start/Spindle Rotation
Coolant System consisting of Coolant Pump, Splash Guards, Manually Adjustable Coolant Nozzle with all Pipe and Hose Connections
Grinding Wheel Clamping/Extraction Bolt Single Point Diamond Dresser
Machine Levelling Base
Machine Geometrical Test Chart 1 No.

Optional Features

Electromagnetic Chuck (Fine Pole)
Multipoint Diamond Dresser with Diamond
3-point Diamond Dresser with Diamond
Overhead Dresser
Auto Dressing with Compensation
Auto Magnetic Separator
Auto Paper Band Filtration System
Dust Extracter
Grinding Wheel
Wheel Flange (recessed) as per Wheel Size for each model
Static Wheel Balancing Stand as per Wheel Size for each model
Variable Spindle Speed
SM Guarding with Sliding Door

Grinding Diameter: 800 mm

Spindle Motor: 11KW

Machine Dimension: 35500 x 3900 x 2900 mm

Machine Weight: ~9000kg

Total Power Consumption: 15KW

Standard Features

Auto Grinding Cycle through NC Control
Programmable Display Unit of 0.001 mm Resolution for Vertical Axis & Cross Axis
Note: Specifications and features are subject to change without prior notice. Please refer to the offer document, as it has precedence.
MPG Mode of Operation for Precise Controls of 0.001 mm Vertical Axis & Cross Axis
Machine Base, Column, Cross Slide, Table are made of High Quality Cast Iron
V & Flat Guide Ways Lined with Turcite-B for all Axes
Centralised Automatic Lubrication System
Coolant System consisting of Coolant Pump, Splash Guards, Manually Adjustable Coolant Nozzle with all Pipe and Hose Connections
Operating Instruction Manual
Grinding Wheel & Flange
Grinding Wheel Clamping/Extraction Bolt
Single Point Diamond Dresser
Machine Levelling Base & Geometrical Test Chart

Optional Features

Electromagnetic Chuck (Fine Pole)
Multipoint Diamond Dresser with Diamond
3-point Diamond Dresser with Diamond
Overhead Dresser
Auto Dressing with Compensation
Auto Magnetic Separator
Auto Paper Band Filtration System
Dust Exhauster
Grinding Wheel
Wheel Flange (recessed) as per Wheel Size for each model
Static Wheel Balancing Stand as per Wheel Size for each model
Variable Spindle Speed
SM Guarding with Sliding Door

Grinding Diameter: 1000 mm

Spindle Motor: 11KW

Machine Dimension: 35500 x 3900 x 2900 mm

Machine Weight: ~9200kg

Total Power Consumption: 18KW

Standard Features

Auto Grinding Cycle through NC Control
Programmable Display Unit of 0.001 mm Resolution for Vertical Axis & Cross Axis
Note: Specifications and features are subject to change without prior notice. Please refer to the offer document, as it has precedence.
MPG Mode of Operation for Precise Controls of 0.001 mm Vertical Axis & Cross Axis
Machine Base, Column, Cross Slide, Table are made of High Quality Cast Iron
V & Flat Guide Ways Lined with Turcite-B for all Axes
Centralised Automatic Lubrication System
Coolant System consisting of Coolant Pump, Splash Guards, Manually Adjustable Coolant Nozzle with all Pipe and Hose Connections
Operating Instruction Manual
Grinding Wheel & Flange
Grinding Wheel Clamping/Extraction Bolt
Single Point Diamond Dresser
Machine Levelling Base & Geometrical Test Chart

Optional Features

Electromagnetic Chuck (Fine Pole)
Multipoint Diamond Dresser with Diamond
3-point Diamond Dresser with Diamond
Overhead Dresser
Auto Dressing with Compensation
Auto Magnetic Separator
Auto Paper Band Filtration System
Dust Exhauster
Grinding Wheel
Wheel Flange (recessed) as per Wheel Size for each model
Static Wheel Balancing Stand as per Wheel Size for each model
Variable Spindle Speed
SM Guarding with Sliding Door

Machine Specifications

Features	Description	Unit	CG-800
Capacity	Grinding Area	mm	800 x 350
	Longitudinal Travel	mm	800
	Cross Travel	mm	350
	Vertical Travel	mm	300
	Max. Load on Table	kg	300
Spindle	Spindle Motor	kW	22
	Spindle Speed	rpm	1000-3000
	Grinding Wheel Size Max. (OD x Width x ID)	mm	400 x 100 x 127
Feed & Traverse	Rapid Traverse (X Axis)	mm/m	10,000
Feed & Traverse	Rapid Traverse (Y/Z Axis)	mm/m	5,000
Drive	X/Y/Z Axis	–	AC Servo Motor & Ball Screw
Others	Total Power Consumption	kW	42
	Input Power Source	–	415V, 3 Phase, 50 Hertz

	Floor Space	mm	4260 x 5900
	Machine Height	mm	2800
	Machine Weight	kg	8000

Model No	Unit	SG 7040	SG 8040 L	SG 1050	SG 1260	SG 1570	SG 2070
Capacity
Grinding Area	mm	700 x 400	800 x 400	1000 x 500	1200 x 600	1500 x 700	2000 x 700
Longitudinal Travel	mm	750	850	1100	1300	1600	2100
Cross Travel	mm	405	450	510	620	720	720
Distance Between Table to Spindle Centre	mm	525	525	650	650	750	750
Table Slot	mm	16	16	16	16	16	16
Max Load on Table (e.m. Chuck + Component)	kg	350	350	600	750	1050	2000
Spindle & Grinding Wheel
Spindle Motor	kW	3.75	3.75	5.5	7.5	11	11
Speed Max.	rpm	1400	1400	1400	1000	1000	1000
Lubrication	–	Greased for Life	Greased for Life	Greased for Life	Greased for Life	Greased for Life	Greased for Life
Grinding Wheel (OD x Width x ID)	mm	300 x 40 x 76.2	300 x 40 x 76.2	350 x 65 x 127	350 x 65 x 127	400 x 100 x 127	400 x 100 x 127
Traverse Speed
Table Speed	m/min	1 ~ 28	1 ~ 28	1 ~ 28	1 ~ 28	1 ~ 28	1 ~ 28
Vertical Rapid	mm/min	300	300	300	300	300	300
Minimum Increment in Vertical Axis	mm	0.001	0.001	0.001	0.001	0.001	0.001
Cross Feed/Stroke	mm/stroke	1 ~ 10	1 ~ 10	1 ~ 10	1 ~ 65	1 ~ 100	1 ~ 100
Cross Rapid Traverse	mm/min	1200	2000	2000	2000	2000	2000
Drive
Longitudinal	–	Hydraulic	Hydraulic	Hydraulic	Hydraulic	Hydraulic	Hydraulic
Vertical	–	Servo Motor with Ball Screw	Servo Motor with Ball Screw	Servo Motor with Ball Screw	Servo Motor with Ball Screw	Servo Motor with Ball Screw	Servo Motor with Ball Screw
Others
Total Power Consumption	kW	7	7	12	14	18	21
Input Power Source	–	415v/3 Phase/50 Hz	415v/3 Phase/50 Hz	415v/3 Phase/50 Hz	415V/3 Phase/50 Hz	415V/3 Phase/50 Hz	415V/3 Phase/50 Hz
Machine Weight	kg	2500	3000	5000	6000	7500	10000
Machine Dimension	mm	3150 x 1975 x 2550	3750 x 2500 x 1950	4690 x 2475 x 2900	5200 x 2990 x 2900	6470 x 3550 x 3100	8500 x 3600 x 3100

Creepgrind & Surfgrind Series

Standard Features

Optional Features

Standard Features

Optional Features

Standard Features

Optional Features

Standard Features

Optional Features

Standard Features

Optional Features

Standard Features

Optional Features

Standard Features

Optional Features

Standard Features

Optional Features

Standard Features

Optional Features

Accessories

Machine Specifications